eMule-0.27c(SF-VQB)v0.3

eMule-0.27c(SF-VQB)v0.3

Modifs :

1] Check diskspace v1.1(Tag: "SLUGFILLER: checkDiskspace"):
* Verifies all non-paused downloads have enough room in the temp partition to finish.
* If there isn't enough room, downloads are paused so that the remaining downloads do have enough room. Files with lower priority are more likely to be paused in favor of higher priority files. Files paused this way have a status of "Insufficient diskspace".
* Whenever a download is paused, resumed, stopped, or has it's priority changed, the free disk space is rechecked to see if previously paused files can be resumed, or new ones paused because of the current non-manually-paused downloads changing.
* v1.1: Rechecks the free diskspace every 15 minutes, just in case the free disk space on the temp partition has changed(files copyed, created, deleted, etc).

[2] Share with subdirectories v2.2(Tag: "SLUGFILLER: shareSubdir"):
* When a directory is shared, all of it's subdirectories are shared as well.
* Only the root directory is saved in the dat files, the subdirectories are rescanned every time the shared files are reloaded or refreshed. As a result, the dat file is smaller than one where all the subdirectories are shared manually, and if a shared directory's subdirectories change(renamed, created, deleted, etc), the change will be detected the next time the shared files are refreshed.
* v2: To share a directory with subdirectories hold the ctrl key, otherwise the directory is shared without it's subdirectories.
* v2: Directories shared with subdirectories are now saved in a seperate dat file. The subdirectories themselves are still not saved.
* v2: Once a directory is shared with subdirectories you cannot unshare/reshare any of it's subdirectories, and the checkbox next to them disappears.
* v2: The incoming directory is shared with subdirectories by default and doesn't have a checkbox(cannot be unshared).
* v2: You can now share files from network shares without having to map them to a drive first.
* v2.1: Local drives appear before network drives.
* v2.2: Network drives load in another thread.

[3] Transfer whole chunk v2(Tag: "VQB: fullChunk"):
* Upload slot cycling is set to cycle only after 9.28MB(the size of a complete chunk) were sent, so that anyone downloading will get at least one chunk complete and be able to hash it and reshare.
* v1.1: A downloader getting a slot with the small-file boost will only download according to the size of the file used for the boost, and not a complete chunk.
* v1.1: No longer counts compressed packets according to their compressed size.
* v2: You can now choose if to always upload 9.28MB, or to simply upload only from one chunk, cycling when the user tries to start downloading the next chunk.

[4] Push small files v1.1(Tag: "VQB: SFpush"):
* Files under 1 chunk get a priority boost in inverse ratio to their size. A 1 chunk file(or above) gets no boost, and a 9.28k(1/1000 chunk) file(and below) gets the maximal boost of times 1000.
* v1.1: Small file boost can be seen in an extra column in the upload window.

[5] Release slots(Tag: "SLUGFILLER: slotRelease"):
* You can set complete files to be release files. As long as there isn't a release file currently uploading, any request for a release file is auto-accepted.

[6] General Bugfixes and Tweaks:
* Known.met is saved after every upload is complete to preserve statistics in case of crash(Tag: "VQB: saveKnownMet").
* Reasks for files now have an added random delay of up to 5 minutes to prevent connection peaks caused by all reasks occuring all at the same time(Tag: "SLUGFILLER: spreadReask").
* Fixed source exchanged sending IDs instead of IPs. Now only sources with a valid IP are sent by IP(Tag: "SLUGFILLER: xchgByIP").
* Modified hashing code to use more standard multi-thread conventions. Now all files hash at once, and CPU usage is trivial. Also, closing eMule while files are hashing no longer causes a crash(Tag: "SLUGFILLER: fastHash").
* When eMule starts the next upload it skips low-id users that aren't currently connected. If a low-id user should have gotten the slot, he is marked, and is automatically given a slot when he next connects. There will be a message in the log and on the window status (bottom left).
* Several tweaks and fixes to the code loading and checking the hashlist(Tag: "SLUGFILLER: hashlistRecheck").
* Multi-layer sorting. If you sort a list by one column, then by another, the order of the sorting will be remembered, and when the items change it will fit the same order of sorting instead of just the last(Tag: "SLUGFILLER: multiSort").
* The statistics of duplicate known files are now merged and the statistics of part files are now saved in the known.met(Tag: "SLUGFILLER: mergeKnown").
* Recheck needed parts when known needed parts finished downloading patch, by Ottavio84(Tag: "enkeyDEV(Ottavio84):noNeededReask").
* Revised code for creating upload packets to one that doesn't need to assume your fragment size and doesn't time out for low slot bandwidth(Tag: "SLUGFILLER: noRefrag").
* New slot control system to ensure maximal upload with minimal amount of slots, so that individual chunks get completed sooner(Tag: "VQB: slotControl"). * Removed pending debug and optimizations *
* Revamped multiple aspects of downloadlist sorting(Tag: "DLsortFix").

[7] See own credits(Tag: "VQB: ownCredits"):
* Clients on your download queue that have you on their upload queue with a credits mark now have a credits mark.
* You can now see you own UL/DL modifier in a client details, next to the client's UL/DL modifier(In brackets).

[8] New Extended Settings:
* Reconnect on LowID(Tag: "SLUGFILLER: lowIdRetry") - How many retries before accepting a low id(Default: 3).
* Infinite Queue(Tag: "SLUGFILLER: infiniteQueue") - Removes the queue size limit and allows your queue to grow as far as it can. Should be good for the network. Test it out for yourself, and see if there's any down sides(Off by default).
* Multiple Instances(Tag: "VQB: multipleInstance") - You can now choose to allow two or more eMules to run at the same time for whatever reasons you may have(Off by default).
* Slot Shaping(Tag: "VQB: SlotShaping") - Each upload slot gets as much bandwidth as that user can take from the first accepted user in the upload slots to the last, so that user can finish the chunk as fast as possible, while the rest make sure the upload limit is reached. With each user that finishes, the next one in line(according to the order the users got a slot) gets that user's bandwidth. There is a minimal bandwidth per slot, though, which all slots get, even the last one(Off by default). * Disabled pending debug and optimizations *
* Hide overshares(Tag: "SLUGFILLER: hideOS") - Parts in a file uploaded a certain amount of times more than the least uploaded parts are not revealed to other users. This is to prevent a case where all the users download the same part and the other parts become less spread. You can set the amount of times a part has to be uploaded before it's hidden, or 0 to disable(Default: 5).

[9] Detailed downloads:
* xrmb patch for showing in a download's progress bar how much of what was downloaded was already completed and hashed. Slightly modified code(Tag: "xrmb:confirmedDownload").
* xrmb patch for seeing which chunks do sources need from you in the sources status bar(Tag: "xrmb:seeTheNeed").

[10] Spread bars v1.2(Tag: "SLUGFILLER: Spreadbars"):
* There is now a "progress bar" in the shared files list showing how many times was each part of a file uploaded.
* Uses black and blue colors, like the download progress bar. Black means never uploaded, light blue means uploaded a little, dark blue means uploaded alot.
* These statistics are saved in the known.met file, using a similar format to the saving of gaps in a part.met file.
* Not based on the similar xrmb patch.
* v1.1: You can now sort the files according to the spread bar. Uses a special sorting formula by VQB.
* v1.1: Thanks to VQB 3 new columns were added: the sorting value based on part upload history, a simple total bytes UL/filesize, and the directory the file is in.
* v1.2: Another column, showing how many times a file was shared completely.

Officially Implemented Features:
We stopped implementing these features because the official team either adopted them or came up with their own version. Don't worry, they're still in, the official versions of them, that is.

[1] Adjustable connections per five seconds(fixed, eMule 0.24):
* eMule 0.23 introduced a features which limits how many connections can be made every 5 seconds, so routers aren't flooded due to too many connections in too little time. However, the official client doesn't allow changing the limit. Now you can set whichever limit you choose.

[2] General Bugfixes and Tweaks:
* Shared file list is only flushed to the control itself after eMule has fully initialized. Prevents a crash at startup with Win9X. Based on the patch by Lucas(fixed, eMule 0.25).
* Server.met only read after the Servers tab has fully initialized. Extention of the patch by Lucas(fixed, eMule 0.25).
* Fixed a possible crash if the gap information in a part.met is corrupted, or simply not in a very specific order. Now uses more effecient code for reading an detecting errors in the gap tags(fixed, eMule 0.25).
* Part files without a hashlist are no longer shared as complete sources(fixed, eMule 0.26).
* CPU optimizations by Maella(fixed, eMule 0.26).
* NT/2K/XP users without a C drive couldn't see the directories control(fixed, eMule 0.27).


Telechargements :

Binaire

eMule 0.27c Khaos 12

eMule 0.27c Khaos 12

Modifs :

Khaotic Statistics and Download Manager v12.0 [K12 eMule 0.27c]

You may be familiar with my statistics "add-on" if you followed the original thread in eMule Development. The reason why it has found a new home here is because the scope of this add-on has increased dramatically since it was first conceived on February 10th, 2003.

This mod has superceded its humble roots as a statistics tree patch. It is now a complete reworking of the statistics window, and it also incorporates my latest side project - The advanced download manager.


STATISTICS:

Over 100 new and interesting statistics, well organized and easy to navigate.

New layout of the statistics window to make better use of the space allowed.

Customizable connections graph.

Cumulative statistics that are saved to an INI file, so you can track your mule's behavior in the longterm.

The ability to reset and restore cumulative statistics.

Numerous parallel statistics that give us valuable insight into how certain features have effect our mule's behavior and the general performance of the network.

It's pretty!


DOWNLOAD MANAGER:

Using the download manager and all features that have been added is completely optional. If you do so desire, eMule can still behave exactly as it used to while downloading files. Why would you want to do that??

Start Next Paused File When Download Completes now only resumes files from the same category, and it takes our nice new Resume Order modifier into account.

There is a new Resume Order modifier that you can set for every file. This simple integer determines the order in which files of the same category are resumed/downloaded.

The same number of files is always downloading. However many you initially have downloading in a given category will remain constant as long as there are files to resume.

There are numerous tools to make the Resume Order modifier easy to set. In most cases, all it takes to setup a huge series to automatically download is a couple of clicks and a single keypress!

Auto-Increment Selected: This asks you for a non-negative starting number and then sets the first selected file to that number. After that, the number is incremented and the next file is set to the new number, so on and so forth. This works in most cases where a series has uniformly named files and can be sorted using the columns. In case the files are not uniformly named, or are of different type...

Step Through Selected: This option asks you for a non-negative starting number for each file you have selected. The current file name is displayed in the input box, so you're never confused about which file you are setting it for. The default value is whatever the Resume Order Modifier is currently set to for that file, so you can effectively select all the files and just change the ones you need to! This saves us the trouble of right clicking on each file individually. And lastly...

Set All Selected To Value: This allows you to set the Resume Order Modifier of multiple files to the same value with a single operation. This is normally not used, but for example, if you are downloading a group of files that has two *.bin and two *.cue and one *.nfo, you can select all the *.cue and *.nfo files and set them to the same priority (Usually 0). Then set *CD1*.bin to 1 and *CD2*.bin to 2. Resume one of the *.cue files. Now, all the *.cue and *.nfo files will download quickly, and then your mule will start in on the big *.bin files one at a time. See how simple that is? Just make sure each group is in its own category, and you'll get the results you desire!


DownloadList columns for Category and Resume Order so that you can view these values at a glance. You can sort the list by these columns, too!


OTHER MODIFICATIONS:

Can run multiple instances. I find this useful when working on a release so that I can leave my stable mule running while I test another one.

Numerous grammatical fixes and general appearance issues with English text.

Widespread support for new mlDonkey clients. The correct icons are used in the lists, and they are correctly identified in Client Details. Version is not currently supported. Only the fact that they are mldonks and not eMule 0.26's

Telechargements:

Binaire

eMule 0.27c Hunter 3

eMule 27c Hunter.3

Modifs de la 3:

- fixed close to systray bug.
- fixed bug that removed menu-entries.
- reactivated download all A4AF.
- a few visual changes.
- a few changes on DynUp.
- some other changes/fixes.

Telechargements

Binaire

eMule 27c LSD-6c

eMule 27c LSD-6c

v6.03

(LSD) Queue Size Max 10.000 to 100.000
(LSD) Fix XS version number sended.
(LSD) Fix Translations, French and Others.
(LSD) Attacks is Displayed Ready for COPY/PASTE to IPFilter, and permement Firewall this user. With Hack mod or No.
xx.xx.xx.xx - xx.xx.xx.x , 000 , (xx) Name
(LSD) Some mini tweaks...
(LSD) Pref Icons (KoKaïne)
(LSD) Max UDP is 75% of max conn.
(LSD) Connection TimeOut 40 to 70 seconds.
(LSD) Stop Share Corrupt Parts other Clients (Slugfiller/STORMIT)
(LSD) Client Detail show version.
(LSD) Auto Reload Sources, now if is enabled perfom full Re-Load from Disc.
(LSD) And stay doing auto load sources in slowly mode. Present in previous too.

when all sources are loaded and connected, i download fast with max con 5sec at 30 or less.

in preference.ini are some values can be changed only there:

This are default values. (0=OFF/1=ON)
OldPrioSystem=0 (Use old priority system)
LSD_AutoLoadSrc=1 (Auto Load Src in Slowly mode, recommended 1)
LSD_AutoSaveSrc=1 (Auto Save Src, recommended 1)
LSD_AutoLoadSrc_time=7200000 (Time in miliseconds)
LSD_AutoSaveSrc_time=3600000 (1 hour = 60*60*1000)

if push buttons default/optim put standard vaules

Téléchargements :

Binaire

eMule 0.27c Hunter 2

eMule 0.27c Hunter 2

Modifs v1 :

- changed Queuesize-range to 500 to 5000
- changed to sourcesave by enkeyDev.
- added a manual drop of full-queue sources.
- changed the view of the statistics.
- modified the download-menu. Now it is much smaller:
Cancel, stop, pause and resume moved into "Download".
All A4AF, auto A4AF, load/save/drop sources moved into "Source".
Open, preview, filedetails and comments moved into "File".
- added better codec identification.[SeeWen]
- added partfile save patch.[InterCeptor]
- added new icons for mldonkey. I think they are from the Nitro-mod.
based on the gfx by Dr.Sirius.
- added download statistics.[xChipx]
- added manual drop of no needed sources.
- added parttraffic. [xrmb]
- QR is shown in source-column and Version in the priority-column.
- QR for sources is not shown for a4af and downloading sources.
- added complete client statistics by xrmb.
- added communtiy push. Everybody who has the communitystring(caseinsensitive) specified on the advanced-prefs-tab in his clientname is pushed.
- added friends-push.
- no friends- and community-push multiplicator. You get only for one of both a push.
- friends are not banned.
- changed user-icons. [DrSirius]
- added four icons for banned users. Originals by DrSirius (i think).
- added new icons for community-members in uploadlist and -queue.
Now there is a little grey or black "C" in the bottom-right corner if the client
is identified as community-member.
- added Dynamic Upload (own prefs-tab) [Hardware].
- added new preferences tab Advanced
- added de-/activate community checkbox.
- en-/disable remove no needed Sources on advanced-tab.
- message receiving time. [enkeyDev]
- shortened the localisation code.
- Double click on client opens client-details.
- a few columns right aligned [idea by Maky]
- remaining column in downloadlist splitted into two columns.
- added ask for filelist to all clients.
- added small- and rarefile push [herbert] with additions by Tarod and MatzeHH
and added columns to waitingqueuelist.
- added fakecheck by AgentSmith
- ban set down to 90 minutes instead of 5 hours
- added reconnect on lowID
- added compression column in uploadlist

Téléchargements :

Binaire

Sources